S70CR200-CC34F Z8350 2G+32G will not boot into Windows, bios loading screen with "B4" in corner
Aragone 2020-06-17 10:33:29 2635 Views3 Replies Hello,
I have a S70CR200-CC34F Z8350 2G+32G that will not boot into windows. A week ago it was working fine, no new hardware configurations have been made.
No updates or bios flashes. I connected the LattePanda to an HDMI TV, and Windows gave me errors and tried to diagnose and fix them, but it would end up rebooting and put me into the same screen, so I was stuck on a loop.
I went to the documentation, and downloaded the x64 version for all CR200 z8350 (2GB+32GB and 4GB+64GB) and unzipped it to the root directory of my FAT32 formatted drive. Plugged it into the 3.0 and 2.0 USB ports of my board and it will not boot into anything. I am stuck in the Latte Panda black screen.
The Bios loading screen has different codes on the bottom right corner, "9C", "B4" and sometimes a "92". This board is brand new, only the W10 installation that it was purchased with.
Please help.
I have a S70CR200-CC34F Z8350 2G+32G that will not boot into windows. A week ago it was working fine, no new hardware configurations have been made.
No updates or bios flashes. I connected the LattePanda to an HDMI TV, and Windows gave me errors and tried to diagnose and fix them, but it would end up rebooting and put me into the same screen, so I was stuck on a loop.
I went to the documentation, and downloaded the x64 version for all CR200 z8350 (2GB+32GB and 4GB+64GB) and unzipped it to the root directory of my FAT32 formatted drive. Plugged it into the 3.0 and 2.0 USB ports of my board and it will not boot into anything. I am stuck in the Latte Panda black screen.
The Bios loading screen has different codes on the bottom right corner, "9C", "B4" and sometimes a "92". This board is brand new, only the W10 installation that it was purchased with.
Please help.