Products Documentation Forum Blog
Forum
userhead stulish
Replies （5）
  • Topic: [TUTORIAL] How to retrieve the BIOS key
    You Reply: I followed your steps but I don't seem to have the MSDM tab, this is on a 4G64Gb version??
  • Topic: [DISCUSSION] Hardware Feature Requests
    You Reply: Hi all,

    I thought i would add my two pence worth.

    1. Power and Reset headers for buttons to be added to a custom case would be useful
    2. Power and Hard Disk Activity headers So external for LEDs could be used.
    3. Stereo Audio input.
    4. Ability to change the Boot Logo (from Panda to Company Logo).
    5. BIOS Recovery (as said many times)
    6. Better cooling so the unit can run full power without throttling due to heat.
    7. 12v power option?
    8. More USB3/2 ports.
    9. Sata or PCIe connector for Hard drive.
    10. option for all versions to come with or without Windows pre-installed.
    11. At least 1 (or even better 2) RS232/422/485 ports.
    12. Better (more robust) connectors for LCD and touch functionality, also capacitive touch would be good.
    13. Different screen size options.
    14. screens to come with mounting point.

    thats all for now

  • Topic: Use onboard arduino
    You Reply: I moved COM1 to COM3 and restarted the LP, and now the Arduino sees COM3, so i selected this in Tools->Serial port and selected Tools->Board->Arduino Leonardo and Tools->Programmer->AVRISP mkII is selected.

    I then upload but get the following error:
    Found programmer: Id = "B³³"; type =
    Software Version = .; Hardware Version = .
    avrdude: error: buffered memory access not supported. Maybe it isn't
    a bufferfly/AVR109 but a AVR910 device?
    has anyone else seen this,how do i overcome this?

    thanks
  • Topic: Use onboard arduino
    You Reply: in my control panel COM3 and COM5 are in use??

    so they are not available in Arduino to select

    any ideas??
  • Topic: Boot Logo
    You Reply: Thanks, i will let you know.