Forum
Replies （9）
- You Reply:
Cooper wrote:Hey guys,
I had this Administrator account before, but this was after reimaging Windows. There was a window upon log in that let you reboot the LP again, and this time got you to the right area where you create your own User Account. Maybe you can try to do a reset PC or reimage it again? Hope it helps.
Some assistance please! So I received my unit, and it stayed in the infamous "Please wait a moment" screen, so i followed steps to reinstall Windows. It all worked and now I have a usable installation of Windows.
The issue now is that it only seems to boot into the "Administrator" account, its this correct behaviour? I cannot make other user accounts or log in using my Microsoft account.
Any help would be appreciated, otherwise nice piece of kit. - You Reply: V_Soul, see if you can do what I did.
1. Extract the BIOS files (from GitHub site) to a separate USB stick. Insert this U-stick and reboot.
2. Reflash BIOS (this should automatically load after you restart PC with this U-stick inserted).
3. After reflash is done, take off U-stick.
4. Extract the files within image.rar in another USB stick (formatted FAT32 and renamed WINPE).
5. Insert your WINPE U-stick and reimage Win10 (this should automatically load as well). Take off U-stick before rebooting again.
6. You may have to restart LP again twice after Win10 set up.
Hope this helps.
P.S. If you still have trouble and want to trash your LP, feel free to send it over to me, hehehe. - You Reply:
bigredky wrote:Great post and save me time. Same question though. Where to stick the other end too? I ran my out of the plywood case that had a pre cut hole for it and it made a difference. Any advice on the best placement for the best results would be appreciated.
I actually placed my antenna inside my acrylic case so I don't lose the antenna or accidentally detach it.
Chris - You Reply:
cyberlife wrote:I've got the same problem and have done exactly the same steps as listed above. Everything works fine apart from step 6, at this point the lattepanda just reboots again and never boots into windows.
Try reflashing the BIOS again, and reimage WIN10 again. The person from the other forum post had to reimage WIN10 twice to make it work. Good luck! - You Reply:
MrRotor wrote:
Here are the steps I did:aziel wrote:Followed instructions from this post: viewtopic.php?f=5&t=64 and this fixed my problem! I'm actually posting this on my new LP. Yay! Now the playing begins...
Interesting and glad you solved it.
I'm having the exact same problem. First I had the "Just a moment..." and after some fiddling I got the x64-image to load from a USB-drive and start a Reset of the PC, but it failed around 30% just as yours. After that I can't get into the Recovery Mode again.
So reflashing the BIOS was the solution to your problem?
I will try a reflash tonight and see if that can get me into the Recovery Mode again, hopefully.
Did you repair the image with DISM aswell?
Found the Default BIOS at:
https://github.com/LattePandaTeam/Latte ... ult%20Bios
And instructions to reflash the BIOS:
https://github.com/LattePandaTeam/Latte ... aster/Bios
1. I downloaded the Default BIOS from the Github site. Extracted the files to a USB drive.
2. I downloaded the WIN10 files (image_64x.rar) from LP site. Extracted the files to another USB drive.
3. I hooked up the BIOS USB drive to the LP and turned on the LP. This automatically flashed the BIOS. Unhooked the USB drive from LP.
4. Hooked up the WIN10 files and reset the LP.
5. Wait a while and the WIN10 files automatically loading. After all is done, it will prompt you to type "Exit" or reset the LP. Make sure to unhook the USB drive before resetting.
6. WIN10 will boot up as Administrator, and it will ask you if you to restart again and the expected first-time set up for WIN10 will work. DONE!
I will post a video later of my version of Unboxing and making it work. - You Reply: Followed instructions from this post: viewtopic.php?f=5&t=64 and this fixed my problem! I'm actually posting this on my new LP. Yay! Now the playing begins...
- You Reply:
schluej wrote:Moin Moin,
Thanks, but this wasn't the problem I was having, though I found someone similar in this forum that had the same problem, so I will try his fix method. Fingers crossed!!
Take a look her viewtopic.php?f=5&t=65 - You Reply:
db2523 wrote:Making progress. Just reflashed the bios. I now have access to recovery mode. Reinstalling Win10...more to follow
Can you please tell me how you reflashed the bios? I got the same errors you have. Maybe the reflashing bios will help me but I don't know how... thanks!
Edit: Nevermind. I found the BIOS files in LP Github site. Thanks! I'll start working on this and hope it works! - You Reply: Good vids, it actually helped me set up mine. Thank you!