Products Documentation Forum Blog
Forum
userhead SOHO
Replies （4）
  • Topic: Volume Keeps Resetting To 37 After Reboot
    You Reply: One workaround is to use a command-line script that resets the volume to a desired level every time the computer restarts.
  • Topic: LP shuts down on logon
    You Reply: Hello again!

    I finally got hold of a barrel jack and powered the board via the 5V/GND pins. However, my problem persists, and the LattePanda keeps losing power. What would you suggest I do next?

    Do you have any update about this? Finally, I think you can connect with your vendor to ask for replacement for the unit, which is not working properly like the others.
  • Topic: LP shuts down on logon
    You Reply: Great, thanks for your reply!

    I don't currently have an adaptor for the CN2 headers. I will try to get one next week, and in the meantime I will swap back to my 3A micro-USB power supply

    Any other suggestions?
  • Topic: The LP shut down suddenly
    You Reply: Hi, I am having a similar issue.

    I have personally used 16 LattePanda boards, almost all of which work fine. However, one of my newer devices has developed a problem similar to the one described in this thread and elsewhere.

    My device spontaneously restarts after only a couple of minutes of operation. Sometimes it happens right as I am logging in, sometimes earlier, sometimes later.

    I am using a 2A power supply, the same which I use for most of my LattePandas. I tried swapping to another, more powerful supply (one which has also been used before without problems), but the problem persisted. So I don't think it is power-related.

    I am able to boot the device into Safe Mode, and it works fine from there. I have it open right now and it is not restarting. As soon as I exit Safe Mode, it starts playing up again.

    I tried re-installing Windows, but the device crashed during installation and rebooted to how it was before. I also tried installing a Windows image via USB, but the same thing happens.

    What should I do now? Any ideas for saving the device? I would like to fix this, or if it isn't possible, to get a replacement board.

    Thanks!