Products Documentation Forum Blog
Forum
userhead sansupercool
Replies （15）
  • Topic: Window 10 Lattepanda logs out itself.
    You Reply: I am finally able to fix this issue by disabling Windows License Manager Service .

    Now no logoffs and no shutdown. I researched further and found this was probably happening because the same Key used for Windows 10 LTS on my lattepanda was used with many other windows 10 devices.
  • Topic: Window 10 Lattepanda logs out itself.
    You Reply:
    LattePanda wrote: ↑Wed Jul 08, 2020 10:00 am @sansupercool, it's more like related to Windows settings. have you changed any settings?
    BTW, you can press ESC during booting process to enter BIOS.
    I have this lattepanda from quite some time and about more than 2 years now. was left unused for about a year thinking its not worth it but when I realized its good enough to do some desktop related work and dosent consume much power I have hooked it to my second monitor to work

    but this problem of auto logout is causing me grief.
  • Topic: Window 10 Lattepanda logs out itself.
    You Reply: yesterday night I discovered at exactly 1200 may lattepanda logged out even when I was logging, so I am wondering is there any settings in the BIOS that are affecting and causing this.

    How do I enter bios ?
  • Topic: boot lattepanda without having to press button
    You Reply: Thank you i will give it a try
  • Topic: getting error: Adafruit_Sensor.h: No such file or directory
    You Reply:
    LattePanda wrote: ↑Thu Nov 29, 2018 2:26 pm
    sansupercool wrote: ↑Thu Nov 22, 2018 9:22 am I started using particle photon that was quite easy to set up , maybe I will give it a try.
    Interesting. Do you mean connecting photon on LattePanda? Look forward to your updates.
    No Man, I meant I stopped using LP
  • Topic: A truly hackable LattePanda Concept Discussion
    You Reply: You cannot beat Raspberry pi.
  • Topic: getting error: Adafruit_Sensor.h: No such file or directory
    You Reply: I started using particle photon that was quite easy to set up , maybe I will give it a try.
  • Topic: getting error: Adafruit_Sensor.h: No such file or directory
    You Reply: I fix this prolem already now I am getting a new error

    Code: Select all

    Arduino: 1.8.7 Hourly Build 2018/10/24 04:33 (Windows 10), Board: "Arduino Leonardo" In file included from C:\Users\LattePanda\Downloads\DHT_project\DHT_Firmata\DHT_Firmata.ino:40:0: C:\Program Files (x86)\arduino-nightly\libraries\Servo\src/Servo.h:84:0: warning: "MAX_SERVOS" redefined #define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER) ^ In file included from C:\Users\LattePanda\Downloads\DHT_project\DHT_Firmata\DHT_Firmata.ino:1:0: C:\Program Files (x86)\arduino-nightly\libraries\Firmata/Boards.h:32:0: note: this is the location of the previous definition #define MAX_SERVOS 0 ^ Sketch uses 20248 bytes (70%) of program storage space. Maximum is 28672 bytes. Global variables use 1319 bytes (51%) of dynamic memory, leaving 1241 bytes for local variables. Maximum is 2560 bytes. avrdude: ser_drain(): read error: The I/O operation has been aborted because of either a thread exit or an application request. avrdude: ser_send(): write error: sorry no info avail avrdude: ser_recv(): read error: The device does not recognize the command. avrdude: butterfly_recv(): programmer is not responding avrdude: ser_send(): write error: sorry no info avail avrdude: ser_recv(): read error: The device does not recognize the command. avrdude: butterfly_recv(): programmer is not responding avrdude: ser_send(): write error: sorry no info avail avrdude: ser_recv(): read error: The device does not recognize the command. avrdude: butterfly_recv(): programmer is not responding avrdude: Yikes! Invalid device signature. Double check connections and try again, or use -F to override this check. avrdude: ser_send(): write error: sorry no info avail avrdude: ser_recv(): read error: The device does not recognize the command. avrdude: butterfly_recv(): programmer is not responding avrdude: error: programmer did not respond to command: leave prog mode avrdude: ser_send(): write error: sorry no info avail avrdude: ser_recv(): read error: The device does not recognize the command. avrdude: butterfly_recv(): programmer is not responding avrdude: error: programmer did not respond to command: exit bootloader avrdude: error: programmer did not respond to command: exit bootloader This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
  • Topic: what good is lattepanda for a software developer ?
    You Reply: In that case I would rather prefer Udoo X86 Advanced Plus or Ultra
  • Topic: Lattepanda shuts down every time I log onto windows via remote desktop
    You Reply: where to attach the cooling fan , I have it cased inside a black metal box.
  • Topic: what good is lattepanda for a software developer ?
    You Reply: well yea, I am a software developer and I wanted together gitlab running on it, but it didn't worked, however I did got rabbitmq up and running, I also use it as NAS(I know not a good usage but it serves) Its running plex media player which I use to watch movies on TV. the hassle of turning it on manually by pressing the button and wait till the red light goes off is big show stopper.
  • Topic: Microsoft Hyper-V 2012R2 on LP
    You Reply:
    uozalp wrote: ↑Fri Jul 01, 2016 6:56 pm I'm running windows server 2012r2 with the hyper-v role installed..
    You surely mean on lattepanda ?
  • Topic: new latte panda using tv as display from hdmi
    You Reply: the GitHub link to 4G/64GB LP is not working , can you please link up the working link.. I will give it a try else I will return LP ..
  • Topic: new latte panda using tv as display from hdmi
    You Reply: How can you surely say that this is the problem ? I have purchased a new one and just connected to TV hdmi !
  • Topic: My lattepanda does not send signal HDMI
    You Reply: I hope this is not the problem with latte panda board I received few days back from DFRobot