Forum
Replies （20）
- Topic: Factory Default GuideYou Reply:
LattePanda wrote: ↑Wed Oct 09, 2019 8:52 am May we know why you need to set Alpha to factory default? do you mean reinstall the Windows?
Please let me know if you will provide the requested guide and siftware/firmware or if you prefere to replace my Alpha 864? - You Reply: **
** - Topic: Factory Default GuideYou Reply:
LattePanda wrote: ↑Wed Oct 09, 2019 8:52 am May we know why you need to set Alpha to factory default? do you mean reinstall the Windows?
I can also just raise a request to get it replace, but if a proper guide can solve it, so I can use the build in Leonardo /Arduino which was the reason for me to get the modules. - You Reply: **
** - Topic: Factory Default GuideYou Reply: To make sure everything work as expected, i have 2 Alpha 864 from the Kickstarter round, one of them can not see the Arduino /Leonardo at all, have tryed many suggestion from this site, but it still dont work.
It work at the begining, but after I installed Linux it wont work even i tryed with the Windows image suggested here. - You Reply: Have any one got this working with the provided usb-c power supply?
- You Reply: Have any one got this working with the provided usb-c power supply?
- Topic: Windows 10 pro ISO fileYou Reply: I can boot my LattePanda Alpha with the new image, but it does NOT solve the problem with the Arduino port, so Im still not abel to use arduino on the board.
- You Reply: I have been told that we can expect to get an updated bios around end of marts.
- Topic: fan controlYou Reply: You have 3 different start stop ranges you select in bios
- You Reply: What if Windows 10 does not find the on-board Arduino Leonardo USB port?
- You Reply: You can control when the fan starts running in BIOS, lowest is 50C, but that migth do it for you.
- You Reply: @LattePanda Team,
when can we expect you to provide a solution to this ? e.a updated BIOS including a guide on how to upgrade the board ?
without this function (and the Arduino issue) a lot of solutions is a NO GO for your board
Thx in advance for your support - You Reply: @LattePanda Team,
When can we expect that you have solved this issue ?
If we are not able to use the build-in Arduino after installing Linux and/or Windows 10 pro, then why have you added that hardware ?
Thx in advance for your support. - Topic: Windows 10 pro ISO fileYou Reply:
smurph wrote: ↑Thu Jan 24, 2019 1:05 pm
@LattePanda Team,LattePanda wrote: ↑Thu Jan 24, 2019 10:32 am
The link works, but it links to a dropbox folder to an incomplete Windows 10 image. When I put that on a USB drive and boot from it, it starts the installation and then says it can't find the installation media or something along those lines. Maybe I'm doing something wrong, but at the very least, the instructions are incomplete.smurph wrote: ↑Sun Jan 20, 2019 11:33 pm Same here! The "image" linked in the documentation does not work.
Would you mind to post the broken link here directly? I will drive to fix! Thanks
http://docs.lattepanda.com/content/alpha_edition/os/
https://www.dropbox.com/sh/d2d4xoe2nk7n ... SsiIa?dl=0
when can we expect that you can provide a working image or at least provide ALL drivers and a guide how to install them in both Windows 10 and Linux ?
Thx in advance for your support. - You Reply: @LattePanda Team,
Please look into this and provide an officiel solution to it asap? - Topic: USB-C Pass-throughYou Reply: Found the below on Aliexpress and it works testet with power pass through, hdmi monitor and usb 3.0 keyboard and mouse. Using Windows 10 pro :
Besiuni USBC 3.1 Converter USB C Type To USB 3.0/HDMI/TypeC Female Charger Adapter for Apple Macbook and Google Chromebook Pixel
https://s.click.aliexpress.com/e/6WgHn6u - You Reply: Still waiting for my own case, but an other user said there was markings inside the case where the antenna should be placed.
- You Reply: Yes, you can switch the power on/off - have done it many times in order to make it work, but no change. The bios option can turn the Arduino on or off.
- You Reply: After instaling Windows 10 pro and nothing else, just Windows update, Windows can not see the Leonardo com port, when I reset the Arduino it try to find drivers but it can not. There is not change at all after installing arduino ide and all the usb drivers, so still waiting for you to provide drivers.