Forum
Replies （20）
- You Reply: Hi,
I just realised that the Serial Number has to be on the LattePanda physically. So after disassembling my project, I found it on the board.
S/N of my Alpha: X-S70KR300-KF60A-192600278.
Thank you,
Lucas - You Reply: Hi,
I just realised that the Serial Number has to be on the LattePanda physically. So after disassembling my project, I found it on the board.
S/N of my Alpha: X-S70KR300-KF60A-192600278.
Thank you,
Lucas - You Reply: Hi,
I just realised that the Serial Number has to be on the LattePanda physically. So after disassembling my project, I found it on the board.
S/N of my Alpha: X-S70KR300-KF60A-192600278.
Thank you,
Lucas - You Reply: Take the Arduino.cs Class that is in
https://github.com/LattePandaTeam/Latte ... ndaFirmata
Do not take the Arduino.cs Class that is in
https://github.com/LattePandaTeam/Latte ... irmataDemo
That is all - You Reply: Hi,
I'm not sure how or where to get the serial number. The only tutorials were for the Windows platform. I'm on UBUNTU. I tried to find it in BIOS but with no luck at all.
UPDATE: I found something using the dmidecode command. The only problem is that the value of Serial Number is "Default string".
I think it might have something to do with the fact that I experienced problems when I tried to update BIOS for the first time. As I was updating to BIOS version "CDJQ-BS-7-S70KR300-KF65A-101-J" (for the AutoPower ON feature), my Alpha started looping while booting and it was basically dead.So I had to update it the hard way. The only way to resurrect my LattePanda was to use the CH341A programmer and I think that might just caused the loss of the Serial Number.
Is there any way to resolve this issue? Or can I somewhere find the serial number physically?
The only thing I can give you is it's UUID: 03000200-0400-0500-0006-000700080009
My version of UBUNTU is 20.4.
Thank you,
Lucas - You Reply: Hi,
I'm not sure how or where to get the serial number. The only tutorials were for the Windows platform. I'm on UBUNTU. I tried to find it in BIOS but with no luck at all.
UPDATE: I found something using the dmidecode command. The only problem is that the value of Serial Number is "Default string".
I think it might have something to do with the fact that I experienced problems when I tried to update BIOS for the first time. As I was updating to BIOS version "CDJQ-BS-7-S70KR300-KF65A-101-J" (for the AutoPower ON feature), my Alpha started looping while booting and it was basically dead.So I had to update it the hard way. The only way to resurrect my LattePanda was to use the CH341A programmer and I think that might just caused the loss of the Serial Number.
Is there any way to resolve this issue? Or can I somewhere find the serial number physically?
The only thing I can give you is it's UUID: 03000200-0400-0500-0006-000700080009
My version of UBUNTU is 20.4.
Thank you,
Lucas - You Reply: Hi,
I'm not sure how or where to get the serial number. The only tutorials were for the Windows platform. I'm on UBUNTU. I tried to find it in BIOS but with no luck at all.
UPDATE: I found something using the dmidecode command. The only problem is that the value of Serial Number is "Default string".
I think it might have something to do with the fact that I experienced problems when I tried to update BIOS for the first time. As I was updating to BIOS version "CDJQ-BS-7-S70KR300-KF65A-101-J" (for the AutoPower ON feature), my Alpha started looping while booting and it was basically dead.So I had to update it the hard way. The only way to resurrect my LattePanda was to use the CH341A programmer and I think that might just caused the loss of the Serial Number.
Is there any way to resolve this issue? Or can I somewhere find the serial number physically?
The only thing I can give you is it's UUID: 03000200-0400-0500-0006-000700080009
My version of UBUNTU is 20.4.
Thank you,
Lucas - You Reply:
LattePanda wrote: ↑Mon Jul 11, 2022 1:43 am
I have bought it 2 weeks ago.romcoca wrote: ↑Fri Jul 08, 2022 12:34 pm This is not working for me.
Hi , when did you purchase the LattePanda Alpha? is it unable to activate out of box?
After installing Win 10 Pro, I can't activated It.
I didn't have the key license but i have a Windows 10 activated on the emmc.
How to reinstall and install Win 10 and activate it when I have a win 10 on the emmc ?
I have the lattePanda 864s with Win10 Activated
The Win10 on emmc is activated but i want to install Win10 on a SSD, i did it but Win 10 Pro can not be activated.
When I try Produkey (on the Win 10 installed on emmc) ti catch the license code, it didn't find the OEM license
How can I install an activated Win10 on sdd ????? - You Reply: This is not working for me.
After installing Win 10 Pro, I can't activated It.
I didn't have the key license but i have a Windows 10 activated on the emmc.
How to reinstall and install Win 10 and activate it when I have a win 10 on the emmc ?
I have the lattePanda 864s with Win10 Activated - You Reply: Tried all other images for 2G/32G CR200/Z850 and none of them worked. Most would not boot but one produced an error at the windows installation screen; never progressed beyond that.
Using the Win 10 media creation tool creates a usable installer but there doesn't seem to be a way to install audio drivers after windows is successfully installed ♂️
This Enterprise edition installer worked but I don't have a license.
Enterprise seems to run faster and I am guessing that is because it is a more streamlined OS. - Topic: USB operative systemYou Reply: do you mean you want to run operating system in your USB drive via USB port? sorry LattePanda doesn't support to boot into OS via USB. if you are using LattePanda delta or alpha, you can install dual OS.
- Topic: Ubuntu 16.04 on LPYou Reply: Same problem, trying to install ubuntu 16.04 , but The display was very flaky (the mouse cursor was jumpy, and the display was leaving artifacts behind)
Plus I am trying to instal Tp Link wireless Archer T2U Plus but Could not find any tutorial on google - You Reply:
LattePanda wrote: ↑Fri Apr 22, 2022 9:03 am
In the instruction in this ReadMe file is different, where in the folder of KR310 just have one .bin file and gives error when you run first commandrjmunns wrote: ↑Wed Oct 13, 2021 5:01 pm I have the 310 version and cannot get this to work. Should I have an EC file. In the download area there is only these three files:
The update process of KR310 version is same as older versions.
eFuitX64.efi
FEC64.NSH
S70KR310A-V9-poweron.bin
Is the process the same as the above or is there a different step.
Also does this work with the USB-C board power or just from the 12v dc board input?
This is critical to the success of my project any help appreciated.
the auto-power-on file works with both USB-C board power and the 12v dc board power input.Code: Select all
eFuitX64,efi S70KB310A-auto-poweron.bin /p /b /n Error: unrecognize parameter /p . Aborting. There is open issue on Github for this problem, thanks in advance for help here. - Topic: Usb Port doesn’t workYou Reply:
ender wrote: ↑Wed Oct 21, 2020 5:20 am
I think they replaced the USB port but I’m not 100% surekasek wrote: ↑Tue Oct 20, 2020 4:01 am I had same problem had to send it back for warranty. Be warned shipping cost is on your dime, they will only reimburse a small amount and what they do reimburse is store credit only. I was not informed of that when I sent mine in
What is the repair they do on your motherboard? - Topic: Usb Port doesn’t workYou Reply: I had same problem had to send it back for warranty. Be warned shipping cost is on your dime, they will only reimburse a small amount and what they do reimburse is store credit only. I was not informed of that when I sent mine in
- You Reply: Hi thanks for your reply, getting a video of it will be hard since it isn't very predictable when it happens.
When it's frozen the screen does still work and will not go on standby but nothing changes on screen.
If by update you mean windows update we already do update it at night.
At the point of a freeze I can't reopen the event viewer unfortunately.
Yes it's very strange, it should indeed still post some events, but it doesn't if its frozen. This to me suggests that the system is frozen on a (close to) hardware level. - You Reply:
ccs_hello wrote: ↑Fri May 15, 2020 4:17 pm Went back to my component bin and I believe it's the cheapest one. Make sure it's the type to bring out PCIe bus. (see pic)
Will sure do, thanks for the information.
IMG_20200515_11.jpg
P.S., always watch out for if sufficient current can be supplied thru those thin cables/sockets, etc. - You Reply:
ccs_hello wrote: ↑Tue May 12, 2020 1:47 pm That M.2 card is for key-B or key-M (a.k.a. gen-2.) It only uses one lane PCIe.
Thanks for that, I did suspect that it might have to be an adapter to solve it.
M.2 key-E (NGFF M.2 gen 1) has a completely different electrical connection arrangement than key-B+M.
One alternative to to get a M.2 key-E to full-sized PICe adapter card to expose the PCIe signals, then use a regular Blackmagic card to plug into its PCIe slot. - You Reply: https://www.instructables.com/id/LED-Tr ... duino-UNO/
i was looking at this did they not need resistors because of the board they used?
also what would i need ot tell if that is even possible im guessing a software app or something? - You Reply: I have a new update to make spike and robust the lattepanda. I was using the CN2 port is ok but I had one or another turn off including with the strong power supply. Just when I watched movies and did heavy operations at same time. It was a turn off occasionally very rare almost not notable like I said in previous post.
Now to totally eradicate the turns off I bought an original Apple charger of 96 Watts for the macbook and a USB-C Passive 40Gbps cable with 2.3 ft and now is more solid than anything and I don’t need to use the CN2 port. Definitely, I will stay with this. I use Jdownloader at high bandwidth downloading, watch videos, use other apps for heavy strong CPU usage all at same time and nothing. I don’t have a turn off in a month.