Forum
Replies （8）
- You Reply: I have also discovered that if i am running RTKNAVI in Lattepanda there is no bars showing sattelites in the grafik area. It works in my laptop but not in Lattepanda. Something is not the same when running RTKNAVI in win10 in my Laptop compared to running RTKNAVI in win10 Lattepanda. Any ideas?
- You Reply: I have also done this tests:
Test1. (Laptop sending to Lattepanda)
STRSVR in win10 Laptop sending data to USB-port with radiolink (ACP220)
Serial Port Utility in Lattepanda recieving data from USB-port with radiolink (ACP220)
The data shows up in Serial Port Utility....sending from Laptop WORKS!
Test2. (Lattepanda sending to Laptop)
STRSVR in win10 Lattepanda sending data to USB-port with radiolink (ACP220)
Serial Port Utility in Laptop recieving data from USB-port with radiolink (ACP220)
The data DO NOT show up in Serial Port Utility....sending from Lattepanda DO NOT WORK!
Seems that the problem is in Win10 Lattepanda!? ...or?
Test3.
Manually Sending (Typing in) data ONLY WITH Serial Port Utility, works fine both from Laptop and from Lattepanda!
Problem occur when i use STRSVR in Lattepanda to send data. - You Reply: OK, I have connected a GPS reciever (NEO-M8T Time & RAW Triple Band +HMC5983 Tallysman TW2710 for RTK) on one of the USB-ports (com9) and reading inputs at a speed of 115200bps.
I have installed RTKLIB and configured input/output in STRSVR.
I am building a RTKLIB base-station for RTK kinematic. (Used in an agriculturul tractor for cm-precicion steering)
Everything is working and i can send output data over TCP-server. (u-blox data stream)
However if i try to send the same data over a radiolink (ACP220) connected to an other USB-port (com10) nothing will be transmitted to the USB-port.
If i do the same on my laptop, the data is transmitted over the USB-port via the radiolink (ACP220) and Everything is working there.
I would like to use radiolink (ACP220) over USB-port instead of TCP (WI-FI).
I am no windows expert but know a Little about it....
I would be glad to explain my Project ones i have solved the radiolink problem. - You Reply: Anyone that know where to get housing for 7 inch display with touch?
- You Reply: I do not know how to install...please help me..
I foun the wiki how to do.
Working excelent! - You Reply: I downloaded new image, unzipped it to a USB-stick. Power on and voila all is ok!
- You Reply: I Think i solved it!
My Power supply was only 1A.... - You Reply: I have the same problem.
How to solve?