Forum
userhead anonymous
Replies (7)
  • You Reply:
    magnus3eriksson wrote: ↑Thu Nov 21, 2019 4:43 pm hello Raxx208.
    what do you think about this one.
    http://www.yslcd.com.tw/Product.aspx?&& ... 156FHM-N41
    i also look for touch screen to Lattepanda Alpha . are having any good idea of what might work
    Yes screen should work.

    No, I can not help you find a touch screen thats bigger than a 10.1" because there are no 6 pin touch screens bigger than a 10.1"

    Anything bigger requires you to use one with a usb converter.

    PM me you have anymore questions.
  • You Reply:
    magnus3eriksson wrote: ↑Thu Nov 14, 2019 6:20 pm hello . what you think about this N133HSE-EA1 for ASUS Ultrabook U38N screen assembly with touch 1920*1080 ips 30pin eDP
    https://www.empowerlaptop.com/p/lcd-u38n/
    I just looked at the datasheet. The lcd screen should work. But the touch will not. It does not have a 6 pin touch cable.

    As far as I know there is no 6 pin touch screens thats bigger than a 10.1.

    I just ordered a 10.1 touch screen that is close to the same active area of my lcd screen. It is 0.1mm to 0.15mm off. Which is not much. It just requires some wiring and soldering.

    Using 2 of these dip boards
    6 pin 0.5mm FFC FPC to 6P dip 2.54mm PCB converter board adapter Capture+_2019-11-15-03-28-53(1).png Capture+_2019-11-15-03-28-53(1).png (1.17 MiB) Viewed 15285 times
    FFC Flexible Flat Cable 6 Pin 0.5mm Pitch 150mm Ribbon Forward Direction Capture+_2019-11-15-03-29-14(1).png Capture+_2019-11-15-03-29-14(1).png (1.07 MiB) Viewed 15285 times
    Ive already done it with another 10.1" touch screen and got it to work. Unfortunately I shorted the touch screen the other day because I ran the cables backwards.

    Luckily the touch screen that I had working did not match my 10.1 LCD screen. So I had to order another one anyways. Bad part is I have to rewire/resolder the 6 pin board again because it uses a different Goodix chip thats on the touch screen

    attachments:

    Capture+_2019-11-15-03-28-53(1).png

    attachments:

    Capture+_2019-11-15-03-29-14(1).png

  • You Reply:
    LattePanda wrote: ↑Tue Nov 12, 2019 8:50 am Hi Raxx208, Thanks for your sharing. It's really a good news for those who need 10.1" screen in their project. Looking forward to your updates on Touch panel.
    You're welcome. Just trying to help our community. I spent months searching and went through a few trial and errors before I found this one.

    Maybe you can add this to the documents and make this a sticky, so it can help others that is trying to find the right screen size for their application.
  • You Reply: Here is a list of other possible working screens. Im pretty positive these will work.

    I matched the 30 pin layout on these screens to the layout of my 10.1 screen.

    11.6" N116HSE-EA1
    Resolution: 1920x1080
    0.5mm pitch
    Receptacle #IPEX 20455
    Cable Plug #IPEX 20453
    Datasheet: https://cdn.datasheetspdf.com/pdf-down/ ... CHIMEI.pdf

    13.3" B133HAN02.0
    Resolution: 1920x1080
    0.5mm pitch
    Receptacle #IPEX 20455
    Cable Plug #IPEX 20453
    Datasheet:
    https://www.google.com/url?sa=t&source= ... 6LJzDLOyq4

    14" B140HAN01.1
    Resolution: 1920x1080
    0.5mm pitch
    Receptacle #IPEX 20455
    Cable Plug #IPEX 20453
    Datasheet: https://cdn.datasheetspdf.com/pdf-down/ ... .1-AUO.pdf

    30 pin edp Cable: I-PEX 20453-030 Flexible Flat Ribbon Cable FFC FPC 30 Pin 0.5mm pitch EDP Panel Same Contact Sides
    https://s.click.aliexpress.com/e/4Xd7HjXa

    If anyone has tested or will test any of these screens please let us know so we can add to the list of working screens. We already have a 15.6", 17.3", and now a 10.1"
  • You Reply: I can not access the datasheet on panelook.
    Can some upload the datasheet on these 2 display?
  • You Reply: What is the highest resolution for these 2 screens?
  • You Reply:
    devzero wrote: ↑Sat May 04, 2019 9:56 am Actually I am using this case, thanks for that, after I found some to print that.
    The mesh of mine is a bit wider, so it's getting more ventilated.

    The screen fits very good in it, the advantage that it's thicker is, you just put into the place and it stands.
    I have bought 30cm extension cables for ethernet, usb-c and hdmi, so I can freely plug and unplug stuff.

    Aren't the sloped sides to be around the screen? On your photos, that looks mixed.
    I don't understand what you are asking me?